One Wire Road, P.O. BOX 667, Sandy Hook, CT 06482
Tel. (203) 426-3133
FAX (203) 426-3805

 

POLYURETHANE 155

CLASS 155C

MW 79-C
Polyurethane 155 magnet wire is insulated with a smooth, uniform film of modified polyurethane resin. Standard color is red. This Product has excellent solderability and thermal properties. Recommended soldering temperature is 390C (734F). This magnet wire is a UL recognized component.

POLYURETHANE 180 CLASS 180C
MW 82-C
Polyurethane 180 magnet wire is insulated with a smooth, uniform film of modified polyurethane resin. Features of this product are its thermal rating of 180C and excellent solderability, thermoplastic flow and heat shock resistance. Recommended soldering temperature is 390C (734F)


POLYURETHANE NYLON 155 CLASS 155C
MW 80-C
Polyurethane Nylon 155 magnet wire is a dual film construction with a base coat of modified polyurethane and a polyamide (nylon) top coat. Standard color is red. Features of this product are its excellent solderability, windability and craze resistance. Recommended soldering temperature is 390C (734F). This magnet wire is a UL recognized component.


POLYURETHANE NYLON 180 CLASS 180C
MW 83-C
Polyurethane Nylon 180 is a dual film construction with a modified polyurethane base coat and a polyimide (Nylon) top coat
. Features of this product are it's thermal rating of 180C, excellent windability, solderability, thermoplastic flow values, heat shock and craze resistance. Recommended soldering temperature is 390C (734F).

FORMVAR CLASS 105C
MW 15-C
Formvar magnet wire is coated with polyvinyl formal resin offering exceptional toughness, windability, and dielectric strength. Should be stress relieved one to four hours, after winding at 125C (275F) to avoid crazing. Requires mechanical or chemical stripping.


TERASOD CLASS 180C
MW 77-C
Tearsod magnet wire is insulated with a smooth film of modified polyester-imide. This is a solderable product with a recommended soldering temperature of 470C (878F). It has excellent electrical, chemical and thermal properties. This magnet wire is UL recognized component.


TERASOD NYLON CLASS 180C
MW 78-C
Terasod Nylon magnet wire is a dual film construction with a polyester-imide base coat and a polyamide (Nylon) top coat. In addition to being solderable features are its excellent windability, craze and solvent resistance. Recommended soldering temperature is 470C (878F).


POLY-BOND CLASS 130C
MW 3-C
Poly-Bond magnet wire is a dual film construction having a base coat of modified polyurethane and a polyvinyl butyral (self bonding) top coat. The bondable top coat may be activated by solvent application, heat or a combination of the two. This product is solderable and its primary use is in the manufacture of self supported coils and coils of unusual shape.


POLY NYLON-BOND CLASS 130C
MW 29-C
Poly Nylon-Bond magnet wire is similar to Poly-Bond with the exception of having a polyamide (Nylon) barrier between the polyurethane base coat and the bondable top coat. It is solderable and activation of the bond coat is achieved in the same manner as Poly-Bond.
This magnet wire is a UL recognized component.

BUTYRAL BOND-TOP COAT CLASS 130C
This polyvinyl butyral (self bonding) top coat may be applied over Terasod, Isomid or AWMP-200. Activation of the bond can be achieved by solvent application, heat or combination of the two. The primary use of this product is in the manufacture of self supported or odd shaped coils.

EPOXY BOND-TOP COAT CLASS 155C
This epoxy (self bonding) top coat may be applied over Terasod, Isomid or AWMP-200. The recommended method of bond activation is with heat. The primary use of this product is in the manufacture of self supported and odd shaped coils where a thermal rating up to 155C is required.

POLYESTER BOND-TOP COAT CLASS 180C
This polyester (self bonding) top coat may be applied over Terasod, Isomid, or AWMP-200. The recommended method of bond activation is with heat although in some applications solvent bonding may produce the desired results. The primary use of this product is in the manufacture of self supported and odd shaped coils where a thermal rating up to 180C is required.

PLAIN ENAMEL CLASS 105C
MW 1-C
Plain enamel magnet wire is insulated with a synthetic resin enamel. It is the oldest of the film insulation and all basic properties are good. Mechanical stripping is required
.

AWMP-200 CLASS 200C
MW 74-C
AWMP-200 magnet wire is insulated with a smooth, uniform film composed of modified polyester resins. Thermoplastic flow values are in excess of 300C and there is an excellent balance of all other properties as well as compatibility with most solvents and varnish systems. This magnet wire is a UL recognized component.


POLYIMIDE (ML) CLASS 240C
MW 16-C
Polyimide magnet wire is insulated with a smooth film of aromatic polyimide resins. Features are excellent solvent and burn-out resistance, thermoplastic flow values, flexability and the ability to withstand excessive overloads. It is compatible with most solvents and varnish systems.